Getting Started Guide
2. Click "Start Mining" from left sidebar.

3. Choose coin, name your rig, add wallet address, select farm, notification and OS

4. Download MinerControl and extract downloaded MinerControl.zip file, no installation needed.


5. Add exclusion to Anti-virus software.
6. Start MinerControl.exe and wait for MinerControl to come online.
On Dashboard you can find information about you mingi process
Download Mobile App for remote tracking
Subscribe to Premium service to enable custom notifcations, have more than 1 miner and see detailed Pool statistics.

Setup
EthMonitoring download: https://github.com/JamesSmith2/EthMonitoring/releases
PS! If it's not starting, try installing .NET Tools framework 4.8: https://dotnet.microsoft.com/download/dotnet-framework/thank-you/net48-web-installer
When EthMonitoring starts up you will see boxes Access token, Host, Name,
Type and Password.
For Access token field you need to insert you code from "Account" page on
site.

After access token is inserted, now you can start adding your rig to monitoring.
Adding mining rigs
You can add different type of miners to EthMonitoring,
they can be in local network or over internet (requires port forwarding).
Local network usually dosen't require port forwarding only to accept in
local machine firewall.
If the EthMonitoring tool is in the same machine you can set host:
"localhost".
If you want to use custom port, you can set like "host:port"

And after adding your miner to list

After miner added
When miner has been added and everything went correctly, now you can see your mining rig listed in "Miners" page on menu.

Important Notice
Claymore miners need to have added in startup -mport -3333
in .bat file
EWBF needs to have --api 0.0.0.0:42000
command line parameter added to enable API access
ZM Dstm needs to have --telemetry=0.0.0.0:2222
command line
parameter added to enable API access
CCMiner needs to have --api-bind=0.0.0.0:4068
parameter in
the command line for API access
XMR-Stak needs to have in startup -i 16000
to open API access
EWBF stays offline troubleshooting
If your EthMonitoring says OFFLINE after setting all parameters, check if EWBF has API enabled. Also check firewall settings, sometimes they get blocked by windows firewall.


SGMiner monitoring
For SGMiner there is need to add API parameters in config file or command line.
--api-listen --api-allow 127.0.0.1
Excavator monitoring
To use Excavator API you need to enable TCP-JSON based access to it.
This can be done by adding this command line parameter (Default port should
be 3456): -p
Videos
Setup
EthControl download: https://github.com/JamesSmith2/EthControl/releases
PS! If it's not starting, try installing .NET Tools framework 4.8: https://dotnet.microsoft.com/download/dotnet-framework/thank-you/net48-web-installer
When EthControl starts up you will see boxes rig name and access token.
For Access token field you need to insert you code from "Account" page on
site
and for rig name you can enter example "myrig".

When access token and rig name entered, you can press "Start".

Configuring
First of all open "EthControl" menu item and press button "Add new".

1) First you need to enter configuration name, example: "My EWBF nanopool"
2) After name you need to select correct software you want to use like
"EWBF"
3) With EWBF we know that we can mine like "ZCash" so in coin we select
ZCoin for profit calculation,
what is later displayed on miners page under current configured rig.
PS! If there's missing your coin, you can leave it empty.
4) Command box, now there you insert your mining command parameters with
wallet address and other configs settings,
usually if you before mined, it is located .bat file you start.
PS! Do not include .exe in front of it, it will be added
automatically

5) Now you can click save from bottom.
Selecting configuration for your rig
After new configuration is made, now you can select it to your rig.
1) Go to "Miners" page
2) Click on yellow button on back side of your newly listed rig

3) Now you can select new configuration you have just made.

4) After config is selected press "Set config"
5) Now that config is selected for EthControl, in few moments you will see that EthControl will automatically download your mining software and start it.

6) After running about few minutes you will also see updated stats and now you can start adding new notifications or view live console on site/mobile app.

7) Now you can start setting up different notifications for your rig
SGMiner monitoring
For SGMiner there is need to add API parameters in config file or command line.
--api-listen --api-allow 127.0.0.1
Excavator monitoring
To use Excavator API you need to enable TCP-JSON based access to it.
This can be done by adding this command line parameter (Default port should
be 3456): -p
Setup
Download latest EthControl v20
Unzip .zip file and then start EthControl.exe

Insert your access token and rig name, after that press "Start"

Configuring
First you need to register a account in pool, we suggest like sparkpool or f2pool.com
After account registered, now we can configure miner to start mining pool account.
Open EthControl from top menu and press "Add new config"
Choose software "BMiner" latest version
Name for config, example "My Grin config"
Edit command field with correct pool url and username Ex. replace nokia555 with your own f2pool account username

Selecting configuration for your rig
After new configuration is made, now you can select it to your rig.
1) Go to "Miners" page
2) Click on yellow button on back side of your newly listed rig

3) Now you can select new configuration you have just made.

4) After config is selected press "Set config"
5) Now that config is selected for EthControl, in few moments you will see that EthControl will automatically download your mining software and start it.

6) After running about few minutes you will also see updated stats and now you can start adding new notifications or view live console on site/mobile app.

Guide how to mine RNV using KAWPOW in 2Miners mining pool
Download latest EthControl v20
Unzip .zip file and then start EthControl.exe

Insert your access token and rig name, after that press "Start"

Configuring
// Yii::t('front_guide', ''); ?>
Now we can configure miner to start mining pool account.
Open EthControl from top menu and press "Add new config"
Choose software "T-Rex" Or "Z-enemy" latest version
Name for config, example "My RVN config"
Edit command field with correct wallet
Example command line: -a kawpow -o stratum+tcp://rvn.2miners.com:6060 -u RVN_WALLET.{name}
Selecting configuration for your rig
After new configuration is made, now you can select it to your rig.
1) Go to "Miners" page
2) Click on yellow button on back side of your newly listed rig

3) Now you can select new configuration you have just made.

4) After config is selected press "Set config"
5) Now that config is selected for EthControl, in few moments you will see that EthControl will automatically download your mining software and start it.

6) After running about few minutes you will also see updated stats and now you can start adding new notifications or view live console on site/mobile app.

Monitoring statistics after mining started
Mining pool stats and statistics can be tracked via MinerMonitoring dashboard or 2Miners.com mining pool.
Guide how to mine RNV using KAWPOW in ravenminer.com mining pool
Download latest EthControl v20
Unzip .zip file and then start EthControl.exe

Insert your access token and rig name, after that press "Start"

Configuring
// Yii::t('front_guide', ''); ?>
Now we can configure miner to start mining pool account.
Open EthControl from top menu and press "Add new config"
Choose software "T-Rex" Or "Z-enemy" latest version
Name for config, example "My RVN config"
Edit command field with correct wallet
Example command line: -a kawpow -o stratum+tcp://stratum.ravenminer.com:3838 -u RVN_WALLET.{name}
Selecting configuration for your rig
After new configuration is made, now you can select it to your rig.
1) Go to "Miners" page
2) Click on yellow button on back side of your newly listed rig

3) Now you can select new configuration you have just made.

4) After config is selected press "Set config"
5) Now that config is selected for EthControl, in few moments you will see that EthControl will automatically download your mining software and start it.

6) After running about few minutes you will also see updated stats and now you can start adding new notifications or view live console on site/mobile app.

Mining GRIN with MinerMonitoring OS
We have support for AMD RX series and nVidia cards.
Download this image: http://griffin.ethmonitoring.com/OS/mmOSv1.4.zip
Current version drivers:
AMD-GPU 19.50
Nvidia 440
Username: ethmonitoring
Password: miner
After downloading image, you need to write to USB 3.0 16GB disk (Minimal 8GB)
Windows image writing
We suggest to use Win32 disk imager for Windows image writing to USB 3.0 disk.

1) Extract image .zip file
2) Choose .img file with Win32 disk imager
3) Choose correct drive letter
4) Write to USB (takes about 10-15min)
5) After finishing, edit config file

6) Now insert USB to your mining rig and wait for it to pop-up in EthMonitoring.com Miners page
Creating config for Grin Miner
Creating config for Grin Miner.
1) Go to "EthControl" page
2) Click on red button on top left named "Add new config"
3) Edit name field ex. "My grin config"
4) Choose software "Grin-Miner v1.0X"
5) Update command field with your own pool & username settings
* There are different type of plugins available for grin-miner

6) Now press "Save and Apply"
7) After that go back to Miners page and press yellow console button after your rig
8) Now you can select new configuration you have just made.

9) After config is selected press "Set config"
10) Now that config is selected for EthControl, in few moments you will see that EthControl will automatically download your mining software and start it.
11) After running about few minutes you will also see updated stats and now you can start adding new notifications or view live console on site/mobile app.

12) Now you can start setting up different notifications for your rig
EthMonitoring OS Linux
We have support for AMD RX series and nVidia cards.
Download this image: http://griffin.ethmonitoring.com/OS/mmOSv1.4.zip
Current version drivers:
AMD-GPU 19.50
Nvidia 440
Username: minermonitoring
Password: miner
After downloading image, you need to write to USB 3.0 16GB disk (Minimal 8GB)
Windows image writing
We suggest to use Rufus for Windows image writing to USB 3.0 disk.
1) Extract image .zip file
2) Choose .img file with Rufus
3) Choose correct drive letter
4) Write to USB (takes about 10-15min)
5) After finishing, edit config file

6) Now insert USB to your mining rig and wait for it to pop-up in EthMonitoring.com Miners page
Selecting config for miner
After new configuration is made, now you can select it to your rig.
1) Go to "Miners" page
2) Click on yellow button on back side of your newly listed rig

3) Now you can select new configuration you have just made.

4) After config is selected press "Set config"
5) Now that config is selected for EthControl, in few moments you will see that EthControl will automatically download your mining software and start it.
6) After running about few minutes you will also see updated stats and now you can start adding new notifications or view live console on site/mobile app.

7) Now you can start setting up different notifications for your rig
SGMiner monitoring
For SGMiner there is need to add API parameters in config file or command line.
--api-listen --api-allow 127.0.0.1
Excavator monitoring
To use Excavator API you need to enable TCP-JSON based access to it.
This can be done by adding this command line parameter (Default port should
be 3456): -p
Logging in
EthMonitoring app is available on both operating system Android and iOS.
After starting app you need to insert your same username and password when registering on EthMonitoring site.

Overview
EthMonitoring app is available on both operating system Android and iOS.
When you have more than one rig listed for monitoring, your mobile app will display and overview of all your rigs.

Viewing miner info and modifying notifications
To view individual miner information, you can use top right menu button to select miner.

After selecting you well get personal miner view.

After pressing "Notifications" button bottom.
Then you have the availability to add, update and even remove
notifications that are pushed to directly to your phone.

Setup
Select mining rig from miners list on site

Creating notification
You can create different notifications for rigs, example high temperature
for GPU,
hashrate below required and more.
Notifications will be delivered by Telegram, SMS or Push notification.


Setting up Telegram service
To setup Telegram service, get your telegram app from
play store or itunes and setup your username.
Enter your username to Settings -> Telegram chat id Example:
"@mytelegramuser"
Then open you telegram app/program and send message
to bot: @MinerMonitoringBot (Random message like: start)
In 60s you will receive message from bot that you are registered for usage.
Setting up SMS Service
To setup SMS API get your API key from: https://textbelt.com
Then insert your API key in Settings and set up your phone number,
remember phone number must start with "+"
Setting up Push notifications
Just download our Android application and notifications are automatically
enabled.
-- Custom sounds can be configured on "Settings" page.
Power Up
First connect network and power do your rig rebooter
After connected network and power, it should appear online in
your account @ rig rebooters section. (Usually takes 2-3min first time)

Setup
First you need to connect your motherboard power button pins.

Connecting to rig rebooter
Rig rebooter has support 8 rigs,
each rig is connected with different cable (included in package).
Connect cables to only these red rounded pins.
K1 means rig slot 1 in web also, K2 Rig slot 2 and so on.

Selecting slot for your rig
After you have connected cable between your rig and rig rebooter,
you can now select slot where your rig is.
This can be done on Miners -> Pencil (Edit button)
Reset minutes means, if your rig has been offline more than X minutes,
rig rebooter will try automatically reboot it for you.

Setting up automatic reboot
After you have connected cable between your rig and rig rebooter,
you can now select slot where your rig is.
This can be done on Miners -> Pencil (Edit button)

Finalising
Now it's fully configured, now you can also use mobile app or website miner console page to reboot / start / stop your rigs online.

Mining rig suggestions
USB 3.0 PCI-E Riser
ZOTAC GeForce RTX 2080 Ti Ftw3 Ultra
MSI Intel Z170 KRAIT GAMING 3X
In this guide we show how to use BMiner with Cuckatoo31 crypto algorithm using NiceHash pool and monitoring controlling by MinerMonitoring.com
If you don’t have NiceHash account yet, you can register one from where
nicehash.com
Creating config for Nicehash crypto mining pool
Now we can configure miner to start mining pool account.
Open EthControl from top menu and press “ Add new config ”
Choose software “BMiner” latest version Name for config, example “ My nicehash config ” Edit command field with correct wallet
-uri cuckatoo31://MY_WALLET.{name}:[email protected]:3372 -intensity 0 -api 127.0.0.1:1880
Change MY_WALLET to Nicehash BTC address
Selecting configuration for miner/rig
Select bulk update for new config that was created
Selecting bulk update for config
After bulk update, set checkbox for rig and press “Save”, after that EthControl will automatically download software and set configuration for mining rig.
Applying configuration for mining rig Setting up NiceHash profitability monitoring for MinerMonitoring
Now to set up Nicehash profitability monitoring, go to “Account” -> “Nicehash”, there it’s needed to insert Nicehash API key, this can be generated here.
NiceHash API key insertion for MinerMonitoring.com After inserting API keys, system will automatically start tracking all rigs connected to Nicehash and MinerMonitoring,
it will automatically update mining rig revenue display.
Guide how to mine KawPow using Nicehash and MinerMonitoring Windows control
First you need to create users in MinerMonitoring.com top right register button and also a nicehash user from here .
After registering, you need to download EthControl tool for remote controlling. This can be found here .
Unzip .zip file and then start EthControl.exe

Insert your access token and mining rig name for EthControl

Creating config for Nicehash crypto mining pool
Now we can configure miner to start mining pool account.
Open EthControl from top menu and press “ Add new config ”
Choose software “GMiner” latest version Name for config, example “ My nicehash config ” Edit command field with correct wallet
--algo kawpow --server stratum+tcp://kawpow.eu.nicehash.com:3385 --user MY_WALLET
Change MY_WALLET to Nicehash BTC address
Selecting configuration for crypto mining rig
Select bulk update for new config that was created Selecting bulk update for config
After bulk update, set checkbox for rig and press “Save”, after that EthControl will automatically download software and set configuration for mining rig.
Applying configuration for mining rig Setting up NiceHash profitability monitoring for MinerMonitoring
Now to set up Nicehash profitability monitoring, go to “Account” -> “Nicehash”, there it’s needed to insert Nicehash API key, this can be generated here.
NiceHash API key insertion for MinerMonitoring.com After inserting API keys, system will automatically start tracking all rigs connected to Nicehash and MinerMonitoring,
it will automatically update mining rig revenue display.
Mining Ethereum using Ethermine and MinerMonitoring windows control
First you need to create users in MinerMonitoring.com top right register button and also a nicehash user from here.
After registering, you need to download EthControl tool for remote controlling. This can be found here.
Unzip .zip file and then start EthControl.exe
Insert your access token and mining rig name for EthControl
Creating configuration for crypto mining rig
Now we can configure miner to start mining pool account.
Open EthControl from top menu and press “ Add new config ”
Selecting configuration for crypto mining rig
Select bulk update for new config that was created Selecting bulk update for config
After bulk update, set checkbox for rig and press “Save”, after that EthControl will automatically download software and set configuration for mining rig.
Starting mining Ethereum with EthControl
After configuration set for mining rig, start EthControl and let it do all the magic needed. It will automatically download Claymore dual-miner and start controlling it.